Diethyl sulfate (DES) is an organosulfur compound with the formula (C2H5)2SO4.[1][2] It occurs as a colorless, oily liquid with a faint peppermint odor. It is toxic, combustible, and likely carcinogenic chemical compound.[3][2] Diethyl sulfate is used as an ethylating agent.

Diethyl sulfate
Molecular structure of diethyl sulfate.
Space filling molecular structure of diethyl sulfate.
Names
Preferred IUPAC name
Diethyl sulfate
Other names
Sulfuric acid diethyl ester
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.000.536 Edit this at Wikidata
KEGG
RTECS number
  • WS7875000
UNII
  • InChI=1S/C4H10O4S/c1-3-7-9(5,6)8-4-2/h3-4H2,1-2H3 checkY
    Key: DENRZWYUOJLTMF-UHFFFAOYSA-N checkY
  • InChI=1/C4H10O4S/c1-3-7-9(5,6)8-4-2/h3-4H2,1-2H3
    Key: DENRZWYUOJLTMF-UHFFFAOYAR
  • O=S(=O)(OCC)OCC
Properties
C4H10O4S
Molar mass 154.18 g·mol−1
Appearance Colorless liquid
Density 1.2 g/mL
Melting point −25 °C (−13 °F; 248 K)
Boiling point 209 °C (408 °F; 482 K) (decomposes)
decomposes in water
Vapor pressure 0.29 mm Hg
-86.8·10−6 cm3/mol
Hazards
GHS labelling:
GHS05: CorrosiveGHS07: Exclamation markGHS08: Health hazard
Danger
H302, H312, H314, H332, H340, H350
P201, P202, P260, P261, P264, P270, P271, P280, P281, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P308+P313, P310, P312, P321, P322, P330, P363, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
3
1
1
Flash point 104 °C (219 °F; 377 K)
Related compounds
Related compounds
Dimethyl sulfate; diethyl sulfite
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Structure and properties

edit

Although the formula for diethyl sulfate is typically written (C2H5)2SO4, a more descriptive formula would be (C2H5O)2SO2. It is a diester of sulfuric acid. Sulfur is tetrahedral.

Diethyl sulfate hydrolyzes readily, forming ethanol and ethyl sulfate. Eventually sulfuric acid is formed with excess water.

Reactions

edit

Diethyl sulfate is used to an alkylating agent to prepare ethyl ethers, ethyl amines[4] and ammonium salts, and ethyl thioethers. In preparing ethyl esters of fatty acids, both equivalents of the ethyl electrophile are transferred, unlike the usual alkylation of phenoxides:[1]

2 RCO2Na + (C2H5O)2SO2 → 2 RCO2C2H5 + Na2SO4

Both dimethyl sulfate and diethyl sulfate react with inorganic nucleophiles as well. For example, potassium iodide gives ethyl iodide.

Preparation

edit

Diethyl sulfate cannot be prepared efficiently analogously to the method used for dimethyl sulfate. The reaction of oleum with diethyl ether results in excessive oxidation of the ethyl groups. Instead, diethyl sulfate is prepared in two steps starting from chlorosulfuric acid:[1]

ClSO3H + C2H5OH → C2H5OSO3H + HCl

The resulting ethyl sulfate is then heated with sodium sulfate, leading to a redistribution reaction:

2 C2H5OSO3H + Na2SO4 → (C2H5O)2SO2 + 2 NaHSO4

Safety

edit

Like other strong alkylating agents and especially dimethyl sulfate, diethyl sulfate is toxic[2] and genotoxic.[5] It is classified as a Group 2A (probably carcinogenic to humans) carcinogen by the IARC.[6] Experimentation with animals has suggested this compound is likely carcinogenic to humans as it was implicated in the development of laryngeal cancer.[7] Evidence of the effects of this chemical compound on reproductive or developmental health is also lacking.[8]

Neutralization

edit

Dialkyl sulfates can be rendered nontoxic by treatment with aqueous ammonia.[1]

Further reading

edit
  • Theodore, S.; Sai, P. S. T. (2001). "Esterification of Ethanol with Sulfuric Acid: A Kinetic Study". Canadian Journal of Chemical Engineering. 79 (1): 54–64. doi:10.1002/cjce.5450790109.

References

edit
  1. ^ a b c d Weisenberger, Karl; Mayer, Dieter; Sandler, Stanley R. (2000). "Dialkyl Sulfates and Alkylsulfuric Acids". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a08_493. ISBN 978-3-527-30385-4.
  2. ^ a b c "Diethyl Sulfate | CAMEO Chemicals | NOAA". cameochemicals.noaa.gov. Retrieved 2021-03-04.
  3. ^ "NCI Thesaurus". ncit.nci.nih.gov. Retrieved 2021-04-02.
  4. ^ Buck, J. R.; Park, M.; Wang, Z.; Prudhomme, D. R.; Rizzo, C. J. (2000). "9-Ethyl-3,6-Dimethylcarbazole (DMECZ)". Organic Syntheses. 77: 153. doi:10.15227/orgsyn.077.0153.
  5. ^ "Agents Classified by the IARC Monographs, Volumes 1–129 – IARC Monographs on the Identification of Carcinogenic Hazards to Humans". monographs.iarc.who.int. Retrieved 2021-04-02.
  6. ^ IARC (1999). "Diethyl Sulfate". Summaries and Evaluations. International Agency for Research on Cancer (IARC). p. 1405.
  7. ^ "NCI Thesaurus". ncit.nci.nih.gov. Retrieved 2021-02-18.
  8. ^ "Diethyl Sulfate" (PDF). United States Environmental Protection Agency. Archived (PDF) from the original on 2016-10-14.
edit