Fast-roping is a technique for descending a thick rope, allowing troops to deploy from a helicopter in places where the aircraft cannot touch down.[1]

Marine from the U.S. 31st Marine Expeditionary Unit fast-roping from a CH-46E Sea Knight helicopter during a training exercise in 2008.

The person holds onto the rope with gloved hands (with or without using their feet) and slides down it. Several people can slide down the same rope simultaneously, provided that there is a gap of about 3 metres (10 ft) between them, so that each one has time to get out of the way when they reach the ground.

Fast roping is quicker than abseiling (rappelling), although more dangerous,[1] particularly if the person is carrying a heavy load, because the rope is not attached to them with a descender. The technique is particularly useful for naval infantry, who can use it to board ships at sea.[2]

History

edit

The technique was first developed by the UK with British rope manufacturer Marlow Ropes, and first used in combat during the Falklands War. The original rope was made of thick nylon that could be used in a manner akin to a fireman's pole. The special ropes used today are braided (plaited), producing a pattern on the outer circumference that is not smooth and so is easier to grip.[3] Originally, each person would hold the rope for the next person, but this has been phased out.

Equipment and techniques

edit
US Army Rangers fast-rope out of a MH-6 Little Bird on the roof of a building during a close quarters combat exercise
South African soldiers fast-roping from an Atlas Oryx helicopter

Rope

edit

The rope must be thick, typically 40mm (1.57 in) diameter, to prevent it from being wildly jerked about from the rotor blast of the helicopter. Some types have a weighted core, the ballast helping to combat the blast effect.[4]

Glove techniques

edit

Fast-ropers use heat-resistant gloves to protect their hands from the heat of friction while descending. Such gloves are generally not dextrous enough to be useful after the descent has been completed, though specialized gloves have been developed for this purpose. More often, a glove-inside-glove technique is used, with tactical gloves worn inside heavy leather metalworking gloves. After descending the rope, the wearer removes the outer gloves to regain dexterity.[5]

Use of feet

edit
 
Fast-roper using his feet while descending to control his speed.

In the U.S. Marine Corps, fast-ropers are trained to control the speed of descent by using their legs and feet in addition to their hands (instructors claim that some Marines have let go of their rope because their gloves became too hot, causing injury).[citation needed] Deployment of around 25 fast-ropers onto a ship can take about 30 seconds.[1]

The British military advises against use of the feet as this can make the descent for following personnel more dangerous: boot polish or the leather of the boot can make the rope extremely slippery.[6]

See also

edit

References

edit
  1. ^ a b c Bianco, Michael (21 June 2009). "31st MEU Marines Fast Rope and Hook N' Climb at Sea". Marines.mil. Archived from the original on 18 February 2013. Retrieved 11 July 2014.
  2. ^ Harrer, Jacob (17 October 2013). "Fast roping prepares Marines for rapid ship-to-shore deployment". United States Marine Corps.
  3. ^ "Fast Rope Inspection Manual" (PDF). Archived from the original (PDF) on 2014-03-07. Retrieved 2013-11-08.
  4. ^ See, for example, US Patent No. 7954410
  5. ^ Trew, Noel J. M.; Camping, John D.; Lee, Robert A.; Bean, Corey R. (2012). Putting Lives on the Line: The Fast Rope Glove Challenge (PDF) (Technical report). Air Force Research Laboratory. AFRL-RH-WP-TR-2012-0098. Archived (PDF) from the original on September 24, 2015.
  6. ^ "The U.S. Navy's Combat Search and Rescue Units". Archived from the original on 2017-02-02. Retrieved 2017-01-29.