The NCR 53C9x is a family of application-specific integrated circuits (ASIC) produced by the former NCR Corporation and others for implementing the SCSI (small computer standard interface) bus protocol in hardware and relieving the host system of the work required to sequence the SCSI bus. The 53C9x was a low-cost solution and was therefore widely adopted by OEMs in various motherboard and peripheral device designs. The original 53C90 lacked direct memory access (DMA) capability, an omission that was addressed in the 53C90A and subsequent versions.

NCR 53C94 SCSI-1 controller in PLCC-84 package.

The 53C90(A) and later 53C94 supported the ANSI X3.l3I-I986 SCSI-1 protocol, implementing the eight bit parallel SCSI bus and eight bit host data bus transfers. The 53CF94 and 53CF96 added SCSI-2 support and implemented larger transfer sizes per SCSI transaction. Additionally, the 53CF96 could be interfaced to a single-ended bus or a high voltage differential (HVD) bus, the latter which supported long bus cables. All members of the 53C94/96 type support both eight and 16 bit host bus transfers via programmed input/output (PIO) and DMA.[1]

AMD 53CF94 SCSI-2 controller in PLCC-84 package.

QLogic FAS216 and Emulex ESP100 chips are a drop-in replacement for the NCR 53C94. The 53C90A and 53C(F)94/96 were also produced under license by Advanced Micro Devices (AMD).[2]

A list of systems which included the 53C9x controller includes:

53C90A

53C94

53C96

See also

edit

References

edit
  1. ^ AMD publication 17348, revision B, May 1993
  2. ^ AMD publication 17348, revision B, May 1993
  3. ^ Sanzharovskiy, Andrey. "Some photos of the board…". X (formerly Twitter). Retrieved 17 May 2024.